
Silver Abstract Water Splash Sculpture - 140cm
Choose options
Other Customers Also Bought
You Might Also Like
Experiences Shared
Cart
Your cart is empty


Choose options
This silver abstract water splash sculpture holds a single burst of liquid at the instant it leaps clear of a surface. A crown of spray flares out across the floor at its foot, a loop of liquid curls up through the centre, and a broad sheet climbs and sweeps over to one side, torn open in places, before it frays into fine streams that each end in a round bead. Every surface is a mirror-bright silver.
A splash this intricate starts life as a digital model rather than a block of material, and it is 3D-printed in PLA, a plant-based resin, from that model, which is how the rising sheet stays so slender, its openings tear so cleanly and every stream at the top keeps its bead. The printed form is finished by hand, its surfaces smoothed until each curve runs on without a break, and then electroplated and brought up to a true mirror. That finish is unforgiving: a dent or a ripple would show at once as a kink in the reflections, so the silver is worked until reflections run unbroken from the foot of the sheet to its crest and gather in small, hard points on the beads.
As a floor piece it suits a hotel lobby, the open middle of an entrance hall, a reception area or a large living room with space to walk round it, and it sits comfortably at the turn of a wide staircase or beside a gallery wall. Because the silver mirrors everything near it, a plain wall or open air behind it lets the outline read clearly, and a lamp angled down from above, or a window to one side, will send highlights running down the sheet and sparking across the beads as people move past. Indoor use only.
Allow 3–4 weeks for a standard piece and 5–6 weeks for a bespoke commission. Gold is the usual alternative to the silver, either as a full mirror or in a softer rose tone, and a solid colour in matte or gloss is possible too; the splash can also be resized to suit a particular room as a bespoke commission. A low plinth can be added to lift it clear of a busy floor, finished to suit the room. It travels upright in a made-to-measure crate, with the beaded streams at the top and the arms of the crown padded and braced, and it is lifted from beneath the crown, never by the rising sheet or the loop. Our main studios are in the UK (Birmingham) and Dubai, with additional global workshops.
Its restless silver outline earns it a place among our abstract sculptures, a lobby or hall will find it with our indoor sculptures, and everything else we make is gathered in our full sculpture collection.
| Height | 140cm |
| Width | 115cm |
| Depth | 66cm |
| Material | Electroplated 3D-Printed PLA, a Plant-Based Resin |
Almost every sculpture at Giant Sculptures is handmade to order, then shipped worldwide free of charge. Below is everything you need to know before you order, and what to expect after.
Almost every sculpture is handmade to order by our artisans — we do not mass-produce.
Production time is separate from delivery time.
Shipping is free worldwide on every sculpture, regardless of size or destination. Standard delivery is by sea freight, typically 6–8 weeks after production is complete.
Express air freight is available on request at additional cost, with delivery in up to 10 days. Ask us before placing your order, or straight after, and we will confirm the cost for your destination.
All sculptures ship in reinforced protective crating, fully insured to purchase value.
Delivery is to the door or curbside at your shipping address.
For larger sculptures shipped by sea freight, the carrier will contact you in advance to arrange a delivery window. Please ensure someone is available to accept the delivery and that the property has suitable access for the size of the piece.
Once the sculpture arrives, you are responsible for positioning it in its final display location. For larger or heavier pieces, we recommend arranging two people (family, friends, or a local moving service) to help with placement.
For all orders delivered worldwide, all customs duties, import taxes, and applicable local clearance fees are fully included in the purchase price. We manage and settle these charges on your behalf, ensuring you will not incur any additional fees upon arrival.
Please note that this policy excludes shipments delivered to Switzerland, as well as any individual orders where an exclusion is explicitly stated prior to purchase; in such instances, local customs charges and import taxes remain the responsibility of the customer.
If you have questions about customs for your specific country, contact us before ordering and we can advise on typical charges for your region.
Where an order qualifies, we accept returns within 14 days of receipt, in original condition and original packaging, subject to our Terms & Conditions.
Because our sculptures are made individually, most orders do not qualify. Returns do not apply to any item that is not held in stock, is made to order, or is custom or bespoke.
To check whether your order qualifies, contact us within 14 days of receipt. On a qualifying return, return shipping is at the customer's cost, a 25% restocking fee applies, and original shipping charges are not refunded.
Every sculpture ships fully insured. In the unlikely event of damage during transit:
Every sculpture carries a lifetime guarantee against finish defects under normal display conditions, subject to our Terms & Conditions.
This covers manufacturing defects, premature finish degradation, and structural failures under normal display. It does not cover damage caused by accidents, misuse, inappropriate environments (for example, an indoor-only sculpture placed outdoors), or modifications made after delivery.
If you have questions about shipping, customs, delivery timing, or anything else before you order, our team is here to help. Contact us via WhatsApp, email, or phone, and we'll respond within 24 hours.
Other Customers Also Bought
Experiences Shared
This silver abstract water splash sculpture holds a single burst of liquid at the instant it leaps clear of a surface. A crown of spray flares out across the floor at its foot, a loop of liquid curls up through the centre, and a broad sheet climbs and sweeps over to one side, torn open in places, before it frays into fine streams that each end in a round bead. Every surface is a mirror-bright silver.
A splash this intricate starts life as a digital model rather than a block of material, and it is 3D-printed in PLA, a plant-based resin, from that model, which is how the rising sheet stays so slender, its openings tear so cleanly and every stream at the top keeps its bead. The printed form is finished by hand, its surfaces smoothed until each curve runs on without a break, and then electroplated and brought up to a true mirror. That finish is unforgiving: a dent or a ripple would show at once as a kink in the reflections, so the silver is worked until reflections run unbroken from the foot of the sheet to its crest and gather in small, hard points on the beads.
As a floor piece it suits a hotel lobby, the open middle of an entrance hall, a reception area or a large living room with space to walk round it, and it sits comfortably at the turn of a wide staircase or beside a gallery wall. Because the silver mirrors everything near it, a plain wall or open air behind it lets the outline read clearly, and a lamp angled down from above, or a window to one side, will send highlights running down the sheet and sparking across the beads as people move past. Indoor use only.
Allow 3–4 weeks for a standard piece and 5–6 weeks for a bespoke commission. Gold is the usual alternative to the silver, either as a full mirror or in a softer rose tone, and a solid colour in matte or gloss is possible too; the splash can also be resized to suit a particular room as a bespoke commission. A low plinth can be added to lift it clear of a busy floor, finished to suit the room. It travels upright in a made-to-measure crate, with the beaded streams at the top and the arms of the crown padded and braced, and it is lifted from beneath the crown, never by the rising sheet or the loop. Our main studios are in the UK (Birmingham) and Dubai, with additional global workshops.
Its restless silver outline earns it a place among our abstract sculptures, a lobby or hall will find it with our indoor sculptures, and everything else we make is gathered in our full sculpture collection.
| Height | 140cm |
| Width | 115cm |
| Depth | 66cm |
| Material | Electroplated 3D-Printed PLA, a Plant-Based Resin |
Almost every sculpture at Giant Sculptures is handmade to order, then shipped worldwide free of charge. Below is everything you need to know before you order, and what to expect after.
Almost every sculpture is handmade to order by our artisans — we do not mass-produce.
Production time is separate from delivery time.
Shipping is free worldwide on every sculpture, regardless of size or destination. Standard delivery is by sea freight, typically 6–8 weeks after production is complete.
Express air freight is available on request at additional cost, with delivery in up to 10 days. Ask us before placing your order, or straight after, and we will confirm the cost for your destination.
All sculptures ship in reinforced protective crating, fully insured to purchase value.
Delivery is to the door or curbside at your shipping address.
For larger sculptures shipped by sea freight, the carrier will contact you in advance to arrange a delivery window. Please ensure someone is available to accept the delivery and that the property has suitable access for the size of the piece.
Once the sculpture arrives, you are responsible for positioning it in its final display location. For larger or heavier pieces, we recommend arranging two people (family, friends, or a local moving service) to help with placement.
For all orders delivered worldwide, all customs duties, import taxes, and applicable local clearance fees are fully included in the purchase price. We manage and settle these charges on your behalf, ensuring you will not incur any additional fees upon arrival.
Please note that this policy excludes shipments delivered to Switzerland, as well as any individual orders where an exclusion is explicitly stated prior to purchase; in such instances, local customs charges and import taxes remain the responsibility of the customer.
If you have questions about customs for your specific country, contact us before ordering and we can advise on typical charges for your region.
Where an order qualifies, we accept returns within 14 days of receipt, in original condition and original packaging, subject to our Terms & Conditions.
Because our sculptures are made individually, most orders do not qualify. Returns do not apply to any item that is not held in stock, is made to order, or is custom or bespoke.
To check whether your order qualifies, contact us within 14 days of receipt. On a qualifying return, return shipping is at the customer's cost, a 25% restocking fee applies, and original shipping charges are not refunded.
Every sculpture ships fully insured. In the unlikely event of damage during transit:
Every sculpture carries a lifetime guarantee against finish defects under normal display conditions, subject to our Terms & Conditions.
This covers manufacturing defects, premature finish degradation, and structural failures under normal display. It does not cover damage caused by accidents, misuse, inappropriate environments (for example, an indoor-only sculpture placed outdoors), or modifications made after delivery.
If you have questions about shipping, customs, delivery timing, or anything else before you order, our team is here to help. Contact us via WhatsApp, email, or phone, and we'll respond within 24 hours.


















