
Holtcote Black Figure Sculpture - 68cm
Choose options
Other Customers Also Bought
You Might Also Like
Experiences Shared
Cart
Your cart is empty


Choose options
Holtcote is a figure sculpture in 3D-printed resin, finished in a textured near-black mottled with deep green: a figure seated with its legs stretched straight out in front, leaning back on both hands and tipping its head right back to gaze upward. It is made to sit on an edge, its hands and seat resting on the surface and its legs reaching out into the air beyond it.
The surface is what sets Holtcote apart: it is rough and uneven all over, pitted and ridged as though the figure had been shaped by hand from wet clay, and the near-black finish is mottled with patches of deep sea green that come and go as you move round it. The pose itself is simple and relaxed, with straight legs, arms braced behind, a long back and a small, close-cropped head flung back so the face points straight up. The contrast between that restless texture and the still, open pose gives the piece the feeling of a quiet moment held for good. It is 3D printed in resin and finished by hand.
Holtcote needs an edge to sit on: the end of a shelf, the corner of a sideboard or a console, or the top of a plinth in a study, a reading room or a hallway, set so its legs stretch out over the side. Placed high, it looks up past the people in the room and draws their eyes upward with it. A pale surface beneath it shows off the dark texture, while a lamp angled from the side catches each ridge and hollow. Indoor use only.
Once ordered, a standard piece takes 3–4 weeks and a bespoke one 5–6. On commission the figure can be finished in a stone grey, a chalk white, a rust red or a gold, with or without the green mottling, and as a bespoke piece it can be made at another size or as a mirrored pair, two figures sitting at either end of a long shelf and gazing up together. It travels in a fitted box with the outstretched legs and the head padded, and it should be lifted by the seat and the hands together, never by the legs alone. Our main studios are in the UK (Birmingham) and Dubai, with additional global workshops.
Leaning back to watch the sky, Holtcote takes its place in our figurative sculptures, joins the shelves and studies of our indoor sculptures, and as a printed piece belongs to our resin sculptures.
| Height | 68cm |
| Width | 66cm |
| Depth | 25.2cm |
| Material | 3D-Printed Resin |
Almost every sculpture at Giant Sculptures is handmade to order, then shipped worldwide free of charge. Below is everything you need to know before you order, and what to expect after.
Almost every sculpture is handmade to order by our artisans — we do not mass-produce.
Production time is separate from delivery time.
Shipping is free worldwide on every sculpture, regardless of size or destination. Standard delivery is by sea freight, typically 6–8 weeks after production is complete.
Express air freight is available on request at additional cost, with delivery in up to 10 days. Ask us before placing your order, or straight after, and we will confirm the cost for your destination.
All sculptures ship in reinforced protective crating, fully insured to purchase value.
Delivery is to the door or curbside at your shipping address.
For larger sculptures shipped by sea freight, the carrier will contact you in advance to arrange a delivery window. Please ensure someone is available to accept the delivery and that the property has suitable access for the size of the piece.
Once the sculpture arrives, you are responsible for positioning it in its final display location. For larger or heavier pieces, we recommend arranging two people (family, friends, or a local moving service) to help with placement.
For all orders delivered worldwide, all customs duties, import taxes, and applicable local clearance fees are fully included in the purchase price. We manage and settle these charges on your behalf, ensuring you will not incur any additional fees upon arrival.
Please note that this policy excludes shipments delivered to Switzerland, as well as any individual orders where an exclusion is explicitly stated prior to purchase; in such instances, local customs charges and import taxes remain the responsibility of the customer.
If you have questions about customs for your specific country, contact us before ordering and we can advise on typical charges for your region.
Where an order qualifies, we accept returns within 14 days of receipt, in original condition and original packaging, subject to our Terms & Conditions.
Because our sculptures are made individually, most orders do not qualify. Returns do not apply to any item that is not held in stock, is made to order, or is custom or bespoke.
To check whether your order qualifies, contact us within 14 days of receipt. On a qualifying return, return shipping is at the customer's cost, a 25% restocking fee applies, and original shipping charges are not refunded.
Every sculpture ships fully insured. In the unlikely event of damage during transit:
Every sculpture carries a lifetime guarantee against finish defects under normal display conditions, subject to our Terms & Conditions.
This covers manufacturing defects, premature finish degradation, and structural failures under normal display. It does not cover damage caused by accidents, misuse, inappropriate environments (for example, an indoor-only sculpture placed outdoors), or modifications made after delivery.
If you have questions about shipping, customs, delivery timing, or anything else before you order, our team is here to help. Contact us via WhatsApp, email, or phone, and we'll respond within 24 hours.
Other Customers Also Bought
Experiences Shared
Holtcote is a figure sculpture in 3D-printed resin, finished in a textured near-black mottled with deep green: a figure seated with its legs stretched straight out in front, leaning back on both hands and tipping its head right back to gaze upward. It is made to sit on an edge, its hands and seat resting on the surface and its legs reaching out into the air beyond it.
The surface is what sets Holtcote apart: it is rough and uneven all over, pitted and ridged as though the figure had been shaped by hand from wet clay, and the near-black finish is mottled with patches of deep sea green that come and go as you move round it. The pose itself is simple and relaxed, with straight legs, arms braced behind, a long back and a small, close-cropped head flung back so the face points straight up. The contrast between that restless texture and the still, open pose gives the piece the feeling of a quiet moment held for good. It is 3D printed in resin and finished by hand.
Holtcote needs an edge to sit on: the end of a shelf, the corner of a sideboard or a console, or the top of a plinth in a study, a reading room or a hallway, set so its legs stretch out over the side. Placed high, it looks up past the people in the room and draws their eyes upward with it. A pale surface beneath it shows off the dark texture, while a lamp angled from the side catches each ridge and hollow. Indoor use only.
Once ordered, a standard piece takes 3–4 weeks and a bespoke one 5–6. On commission the figure can be finished in a stone grey, a chalk white, a rust red or a gold, with or without the green mottling, and as a bespoke piece it can be made at another size or as a mirrored pair, two figures sitting at either end of a long shelf and gazing up together. It travels in a fitted box with the outstretched legs and the head padded, and it should be lifted by the seat and the hands together, never by the legs alone. Our main studios are in the UK (Birmingham) and Dubai, with additional global workshops.
Leaning back to watch the sky, Holtcote takes its place in our figurative sculptures, joins the shelves and studies of our indoor sculptures, and as a printed piece belongs to our resin sculptures.
| Height | 68cm |
| Width | 66cm |
| Depth | 25.2cm |
| Material | 3D-Printed Resin |
Almost every sculpture at Giant Sculptures is handmade to order, then shipped worldwide free of charge. Below is everything you need to know before you order, and what to expect after.
Almost every sculpture is handmade to order by our artisans — we do not mass-produce.
Production time is separate from delivery time.
Shipping is free worldwide on every sculpture, regardless of size or destination. Standard delivery is by sea freight, typically 6–8 weeks after production is complete.
Express air freight is available on request at additional cost, with delivery in up to 10 days. Ask us before placing your order, or straight after, and we will confirm the cost for your destination.
All sculptures ship in reinforced protective crating, fully insured to purchase value.
Delivery is to the door or curbside at your shipping address.
For larger sculptures shipped by sea freight, the carrier will contact you in advance to arrange a delivery window. Please ensure someone is available to accept the delivery and that the property has suitable access for the size of the piece.
Once the sculpture arrives, you are responsible for positioning it in its final display location. For larger or heavier pieces, we recommend arranging two people (family, friends, or a local moving service) to help with placement.
For all orders delivered worldwide, all customs duties, import taxes, and applicable local clearance fees are fully included in the purchase price. We manage and settle these charges on your behalf, ensuring you will not incur any additional fees upon arrival.
Please note that this policy excludes shipments delivered to Switzerland, as well as any individual orders where an exclusion is explicitly stated prior to purchase; in such instances, local customs charges and import taxes remain the responsibility of the customer.
If you have questions about customs for your specific country, contact us before ordering and we can advise on typical charges for your region.
Where an order qualifies, we accept returns within 14 days of receipt, in original condition and original packaging, subject to our Terms & Conditions.
Because our sculptures are made individually, most orders do not qualify. Returns do not apply to any item that is not held in stock, is made to order, or is custom or bespoke.
To check whether your order qualifies, contact us within 14 days of receipt. On a qualifying return, return shipping is at the customer's cost, a 25% restocking fee applies, and original shipping charges are not refunded.
Every sculpture ships fully insured. In the unlikely event of damage during transit:
Every sculpture carries a lifetime guarantee against finish defects under normal display conditions, subject to our Terms & Conditions.
This covers manufacturing defects, premature finish degradation, and structural failures under normal display. It does not cover damage caused by accidents, misuse, inappropriate environments (for example, an indoor-only sculpture placed outdoors), or modifications made after delivery.
If you have questions about shipping, customs, delivery timing, or anything else before you order, our team is here to help. Contact us via WhatsApp, email, or phone, and we'll respond within 24 hours.




















