{"product_id":"green-ringed-leg-cast-resin-dining-chair-80cm","title":"Green Ringed Leg Cast Resin Dining Chair - 80cm","description":"\u003ch3\u003eDescription\u003c\/h3\u003e\u003cp\u003eThis dining chair is a single pale green casting from the top of its back to its feet. Back and seat are a single rounded shell with no join in it, the back a plain squared oval and the seat dished just enough to be felt. Two small finger holes are cut at the seat line where the shell turns. Four round legs taper to the floor, and the bottom half of each is turned in fine close rings while the top half stays smooth.\u003c\/p\u003e\u003ch2\u003eTurned Rings on an Otherwise Plain Leg\u003c\/h2\u003e\u003cp\u003eThe rings are the whole detail and they are placed where a chair gets looked at least. Each leg is smooth from the seat down to about halfway, then turns into fine close rings for the rest of its length, so from standing the chair reads as plain and from a seat the legs read as turned. It is a quiet joke and it works because everything else is unornamented. Back and seat above run together with no join line showing, and the two finger holes at the seat line are the only openings in it. The green is deepest along the seat edge and palest across the back panel.\u003c\/p\u003e\u003cp\u003eAt 80cm this dining chair stacks visually rather than physically: it is light on the eye and can be used four or six round a table without the room filling up. It reads best on a pale floor, which the green relates to, and it takes side light well because that is what shows the turned rings on the legs. The shell is translucent, so anything behind it shows through the back. Indoor use only.\u003c\/p\u003e\u003ch2\u003eThe Ring Detail, the Shell, and Sets Made Together\u003c\/h2\u003e\u003cp\u003eSet aside 3–4 weeks for a standard piece and 5–6 weeks for a bespoke commission. The ring detail, from this half-length run up the leg to rings over the full length, or a plain leg with none. The shell, which can carry these two finger holes or be left unpierced. And the tint, this green or an amber, a smoke grey, or clear with no colour at all. The seat height and the width across follow your figures, and a set is poured together so the tint holds, which matters more on a clear chair than an opaque one. Two chairs go in a crate and one person can lift one. Our main studios are in the UK (Birmingham) and Dubai, with additional global workshops.\u003c\/p\u003e\u003cp\u003eTurned rings on a plain shell chair suit our \u003ca href=\"\/collections\/functional-sculpture-art-furniture\"\u003eart furniture\u003c\/a\u003e; the pale green casting is shown with our \u003ca href=\"\/collections\/resin-sculptures\"\u003eresin sculptures\u003c\/a\u003e, and the chair among our \u003ca href=\"\/collections\/indoor-sculptures\"\u003eindoor sculptures\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eSpecification\u003c\/h3\u003e\n\u003ctable class=\"spec_table\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e80cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e45cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003e42cm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eTinted Cast Resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"Giant Sculptures","offers":[{"title":"Default Title","offer_id":53969981440347,"sku":"J245","price":3170.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0869\/3383\/2027\/files\/J245.jpg?v=1791375721","url":"https:\/\/giant-sculptures.com\/products\/green-ringed-leg-cast-resin-dining-chair-80cm","provider":"Giant Sculptures","version":"1.0","type":"link"}